TB-02-Kit_V2.0 development board is an intelligent lighting development board designed for TB-02 module, with five PWMs on board, which can be adjusted by RGB seven-color lights and two warm and cold light beads. All available IOs of the module are pinned out by row pins, which is convenient for developers to develop and debug by them themselves. UART interface supports firmware burning. At the same time, the SWS pin at the row of pins can also be used for firmware burning with the official burning tool of Telink.
Features:
- Module Model: TB-02
- Two options: Ali Tmall Genie Special Edition; Regular AT Edition
- BLE5.0 with Mesh support
- Interface type: standard micro USB + 2.54mm pitch row of pins
- Provides PWM/I2C/GPIO/ADC interface
- Comes with R/G/B triple bead and with cool/warm bead
- Self-reset button and 1 user-defined button
- Support Tmall Genie Voice Direct Control
- Support Android/IOS APP control and WeChat app control
- Support AT command, SDK secondary development.
Specifications:
- Module Model: TB-02-Kit_V2.0 Development Board
- Package: DIP-20 (2.54 pitch standard row of pins)
- Size: 32.3*28.7*18.0(±0.2)mm
- Antenna Form: On-Board PCB Antennas
- Spectral Range: 2400 ~ 2483.5MHz
- Transmitting Power: 10±2 dBm
- Reception Sensitivity: Less than -94dBm
- Working Temperature: -20 °C ~ 70 °C
- Storage Environment: -40 °C ~ 125 °C , < 90%RH
- Scope of Electricity supply: Micro USB power supply voltage 4.75V~5.25V, 5.0V recommended
- Supported Interfaces: PWM/GPIO/UART/SPI/I2C/
- Number of IO Ports: 14
- Serial Port Rate: Default 115200 bps
- Bluetooth: BLE 5.0
- Power Consumption: Sleep mode: 0.8uA (single module) Standby mode: 3mA, (single module), Full load mode (TX: 10dBm): 23mA (single module), Development board backplane: 4mA
- SPI Flash: Built-in 512KByte
Rezensionen
Es gibt noch keine Rezensionen.